Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pasadena Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass shower door and enclosure service as Mr Glass in Pasadena, from frameless sliding doors in mid-century ranches to pivot doors in Greene & Greene Craftsman bathrooms. Our crews have spent years removing, repairing, and installing Mr-Glass hardware in homes where the original glass is often older than the crews themselves. That hands-on time means we know exactly which roller assemblies fail, which hinges sag, and which seals leak before we ever set foot in your bathroom. Call (626) 657-5396 for a free estimate. We are an independent Mr-Glass service provider, not an authorized dealer, and that’s a distinction worth understanding before you book anyone.
Why Trust Sawyer Remodel Pasadena for Your Mr-Glass Construction?
Luca Romano, our owner and lead contractor, learned construction the slow way. He grew up in East Los Angeles helping his uncle patch and paint every weekend, trained through the construction technology program at East Los Angeles College, and has spent two decades doing the work himself, not just managing it from a phone. Around Pasadena, that matters. Older homes near Bungalow Heaven have bathrooms with settled floors, out-of-plumb walls, and tile work done before anyone used waterproof membrane. A Mr-Glass pivot door that rubs the curb in a 1940s bathroom is rarely just a hinge problem. It’s usually a combination of worn hardware and a floor that’s moved a quarter inch over seventy years. We diagnose both, and we fix what’s actually wrong. Every job runs under The Relay Visibility Guarantee: a live arrival time before we show up, photo updates before and after the work, and a written price before any tool is picked up.
We’re also held to The Relay Standard, which started in 2005 when Sawyer Remodeling was founded. That means the invoice you approve is the invoice you pay. No change orders materializing mid-job. No fuzzy “well, once we opened the wall” pricing. If it’s not done right, our 365-Day Done Right Promise covers the repair, in writing, for a full year.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Pasadena
- Worn pivot hinges causing sagging glass and curb rubbing. Mr-Glass pivot doors carry a lot of weight on a single hinge point. After years of daily use, the hinge pin wears and the glass settles, sometimes dropping a full eighth of an inch. In Pasadena’s older homes, where original tile curbs are already uneven, that sag becomes a grind. We replace the pivot assembly with OEM Mr-Glass hinges when available and realign the glass so it clears the curb cleanly.
- Roller assemblies on sliding doors jumping the track or grinding. The nylon rollers on Mr-Glass frameless sliding doors are a consumable. They disintegrate, especially in bathrooms that get hot and dry in Pasadena summers then humid during winter rains. Once a roller loses its bearing surface, the door rides metal-on-metal and either grinds or hops the track entirely. We replace roller assemblies in pairs so the door hangs level.
- Water leaking at the bottom sweep from failed vinyl seals. The vinyl sweep on a Mr-Glass door is what keeps shower water from pooling on your bathroom floor. Pasadena’s hard water accelerates vinyl hardening. Once the seal stiffens, water finds the gap. We replace sweeps with OEM Mr-Glass parts when we can get them, and with quality aftermarket sweeps when the OEM version is discontinued.
- Mineral etching making glass look cloudy. Pasadena’s water comes from the Colorado River and the Sierra snowpack, and it carries enough dissolved minerals to etch shower glass over time. Once the etching eats into the glass surface, no cleaner fixes it. We tell homeowners straight: if the glass is etched, replacement is the only real fix. If it’s just buildup, a professional restoration is worth trying first.
- Header misalignment causing door drift. In homes with settled foundations, common throughout Pasadena’s pre-war housing stock, the header above a Mr-Glass sliding door can fall out of level. Then the door drifts, bangs the jamb, and stresses the rollers. We shim and re-level headers before installing new hardware, because straight hardware on a crooked header is a short-term fix.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We source OEM Mr-Glass hinges, rollers, and seals whenever the parts are still in production and available through our suppliers. The fit and finish on OEM hardware is what the door was designed around, and for something like a pivot hinge, there’s no aftermarket equivalent we trust as deeply. But we don’t push a full door replacement when a quality aftermarket sweep or roller kit gives another decade of service. Our tech pulled a Mr-Glass frameless sliding door off its track in a 1950s Mr Glass in Pico Rivera and Pasadena ranch last month because the original nylon rollers had disintegrated into powder inside the header channel. We replaced both roller assemblies with new OEM parts, realigned the header, and the door now glides without catching the tile curb. The repair was a fraction of what full door replacement would have cost, and the glass was never touched. That’s the repair-vs-replace math we run on every job. Call (626) 657-5396 if you’re not sure which side of that math your door falls on.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the glass, the hardware, the header, and the curb. On a Mr-Glass door, that means checking roller wear, hinge play, sweep condition, and whether the opening is still square. We photograph everything and explain what we found in plain language.
- 2
Written price. Before any work starts, you get a written line-item price. That number covers parts and labor. It doesn’t change once we open the door assembly.
- 3
Repair or install. We replace the failed parts with OEM Mr-Glass hardware where available, or a quality aftermarket equivalent we’ve tested. For new installations, we set the door plumb, level, and true to the opening, which on older Pasadena homes often means correcting the surrounding tile and drywall rather than hiding the gap with caulk.
- 4
Testing. We run the door through its full range of motion, check the sweep against a water test, and verify the glass sits square. If it catches, rubs, or drips, it isn’t done.
- 5
Warranty. Every Mr-Glass repair carries our 365-Day Done Right Promise. If something fails within a year, we come back and fix it. In writing.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Pasadena
We service and install the three main Mr-Glass series: the frameless sliding shower door series, the pivot shower door series, and the neo-angle shower enclosure series. Each has its own weak points. The sliding doors wear rollers. The pivot doors wear hinges. The neo-angle enclosures, with their multiple glass panels and corner joints, tend to develop leaks at the panel-to-curb intersections over time. We stock common Mr-Glass rollers, sweeps, and hinge components locally so most repairs in Pasadena don’t wait on a freight shipment. For less common hardware, we order OEM parts directly from our suppliers and keep you updated on delivery timing.
We Also Service These Brands
Mr-Glass is a brand we know deeply, but it’s not the only one. We install and service kraftmaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures across Pasadena. If your bathroom project involves more than just the shower door, we’re equipped to handle the full scope under one roof and one written price as your General Contractor.
FAQs – Mr-Glass Construction Service in Pasadena
Yes. Roller replacement on a Mr-Glass sliding door is a hardware-only repair in most cases. We remove the door panel, pull the old roller assemblies from the frame, install new OEM or aftermarket rollers, and rehang the glass. The glass itself stays untouched. Call (626) 657-5396 and we’ll tell you over the phone whether your door is a candidate.
Sagging on a Mr-Glass pivot door almost always means the pivot hinge has worn past its tolerance. The hinge pin and barrel wear together over years of use, allowing the glass to drop. In Pasadena homes with older tile curbs that may not be perfectly level, even a small amount of sag causes grinding. The fix is a new pivot assembly, and it’s a repair we do regularly.
We use OEM Mr-Glass seals when they’re available. When a specific seal has been discontinued, we use an aftermarket sweep that matches the door’s profile and glass thickness. The priority is a dry bathroom floor, and we won’t install a seal that doesn’t seat correctly just because it has a brand name on the package.
Sometimes. If the existing Mr-Glass panels are in good condition and the opening can be reconfigured, we can reuse the glass and reposition the hardware for a walk-in configuration. If the glass is etched, chipped, or too short for the new opening, replacement is the honest answer. We’ll tell you which path applies to your specific enclosure before you spend a dollar.
Our work carries the 365-Day Done Right Promise, which covers our repair labor and the parts we installed for a full year. That’s separate from any manufacturer warranty on the original door. If the original Mr-Glass warranty is still active, we’re careful to use only parts and methods that don’t void it.
Here are the price ranges we quote across Pasadena for Mr-Glass work:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Frameless Glass Shower Enclosures | $4,500 – $12,000 |
The final number depends on glass size, hardware type, and what we find when we open the assembly. What we quote is what you pay. Call (626) 657-5396 for a written estimate specific to your bathroom.
Book Your Mr-Glass Service in Pasadena, CA
If your Mr-Glass door is sagging, grinding, leaking, or just looks tired, call (626) 657-5396. We’ll schedule a visit, give you a live arrival time, and put the price in writing before any work begins. That’s how we’ve run every job since 2005.
Written by Luca Romano, Owner at Sawyer Remodel Pasadena, serving Pasadena since 2005.
