Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Pasadena Owner’s Guide
A full Tremron kitchen remodeling project in Pasadena typically runs $14,000 to $45,000 installed, depending on cabinet count, countertop material, and whether we’re moving plumbing or electrical. We stock Tremron-compatible hardware, hinges, drawer glides, and replacement panels in our Pasadena shop, and we can match most discontinued lines within a week. Most Pasadena homeowners reach out after one specific moment: a drawer that won’t close, a door that’s sagged off its hinge, or a cabinet face that’s delaminating from years of kitchen steam and California dry heat.
If you’ve got a Tremron kitchen and something’s failed, you’re not looking for a full gut job. You want the part matched, the fix priced, and the whole thing handled before it turns into a bigger problem. That’s exactly what we do.
Key Takeaways:
- Tremron kitchen remodeling in Pasadena: $14,000 – $45,000 for full projects
- Individual parts (hinges, glides, drawer boxes, panels) are often a fraction of that
- We match Tremron lines by measuring the part, not just by model name
- Same-week installation available once the part is confirmed
- Written price before any work starts, with a 365-Day Done Right Promise
Which Tremron Models This Applies To
Tremron cabinetry has changed hands and changed specs over the years, and that’s where most Pasadena homeowners get tripped up. The brand name on the door doesn’t always tell you which production run you’re dealing with. We identify the right part by three things: the hinge style (overlay, inset, or European), the bore pattern on the door, and the box construction dimensions. If you’ve got a label inside a drawer or on the back of a cabinet box, grab a photo of it before you call.
Here’s the compatibility gotcha we see regularly in Pasadena: Tremron used different hinge mounting plates on their frameless lines than on their framed lines, and the two are not interchangeable. A hinge that looks identical at arm’s length will bind or leave a gap if it’s from the wrong series. We measure the cup depth and the mounting hole spread to confirm which one you have before ordering anything.
For most hardware, quality aftermarket equivalents from Blum or Salice do the job and often outlast the original Tremron parts. For doors, drawer fronts, and panels, we prefer OEM or custom-milled to match the finish and grain. If you’re in a craftsman home near Bungalow Heaven with original Tremron cabinets, matching the wood species and stain matters more than brand marking. Luca Romano has worked on plenty of those and knows when a replacement has to blend, not just fit.
Styles & brands we work with
Signs Your Tremron Kitchen Remodeling Is Failing
- Door binds or won’t close flush. The hinge has lost its spring tension or a mounting screw has stripped the cabinet box. Adjusting won’t hold. The hinge needs replacement.
- Drawer slides catch, stick, or drop on one side. The roller bearings in the glide have worn out or a nylon wheel cracked. This is the most common failure we replace on Tremron kitchens in Pasadena, especially on heavily used pot-and-pan drawers.
- Cabinet face is peeling or bubbling at the bottom edge. Steam from the dishwasher or sink has lifted the laminate or veneer. Once moisture gets between the layers, it doesn’t reseal. The panel needs to be replaced.
- Drawer front has separated from the box. The glue joints failed or the dovetail sockets cracked. If it’s a clean separation, we can re-glue and pin it. If the material is compromised, we install a new box.
- Hinge holes are stripped and the screw just spins. The particleboard or MDF has given out around the screw threads. We repair with solid hardwood plugs or metal thread inserts, then remount the hinge so it actually holds.
Replacement Cost & What’s Included
For a full Tremron kitchen remodel in Pasadena, you’re looking at $14,000 to $45,000 depending on size, materials, and how much we’re relocating or rebuilding. But if you’re replacing specific failed parts, the scope is much smaller. Here’s how pricing breaks down in this market:
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Kitchen island installation: $3,000 – $10,000
- Backsplash installation: $800 – $2,500
- Individual hardware replacement (hinges, glides): quoted after we confirm the part
Every quote includes the parts, the labor to install, cleanup, and a written price before we start. No change orders, no surprises on the invoice. Since Sawyer Remodel Pasadena is an independent contractor and not affiliated with Tremron, we order through our own supply channels and pass the part cost through at what we paid. You see it all on the line item.
The work is covered by our 365-Day Done Right Promise. If it’s not done right, we make it right. In writing, on every project.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: read the label inside the drawer or cabinet box, measure the hinge cup diameter, and take clear photos of the failed part from a couple angles. That saves us a trip and helps us bring the right replacement on the first visit. What we don’t recommend is removing a cabinet face or drawer box with the intent to re-glue and re-clamp it if you don’t have the right jigs. Misaligned doors and drawers might not be dangerous, but they’re easy to get wrong in a way that looks fine for two weeks and then sags again.
Tremron parts aren’t something most Pasadena hardware stores keep on the shelf. We carry a range of Tremron-compatible hardware in our shop and can match most discontinued lines within a week. If you’re not sure whether the part can be saved or needs replacing, call us at (626) 657-5396 and describe what you’re seeing. The work tells you everything. You just have to know how to listen to it. And if it’s a simple fix, we’ll tell you that over the phone before anyone books a service call.
FAQs
Most Tremron cabinets in Pasadena last 15 to 25 years with normal use, though hardware like hinges and drawer glides typically needs replacing in the 8 to 12 year range. Dry California air speeds up wood expansion and contraction, which is why we see more hinge loosening here than in coastal markets. Call (626) 657-5396 and we can inspect yours and tell you what’s got years left and what’s done.
Some parts can be repaired. Stripped hinge holes, separated drawer fronts, and worn glides are often fixable in under an hour. Laminated panels that have absorbed moisture usually can’t be repaired and need replacement. We’ll tell you which one you’re dealing with before quoting anything.
A typical hardware or drawer replacement takes one to two hours once the part is confirmed on site. If we’re matching a discontinued Tremron panel or door, ordering and finishing may add several days. You’ll get a written time estimate along with the written price before any work starts.
We stock common Tremron-compatible hinges, slides, and mounting hardware in our Pasadena shop. Obscure or discontinued parts usually arrive within a week through our supply network. We also stock parts for KraftMaid, Cambria, and Silestone if you’re mixing lines in your kitchen. Call (626) 657-5396 with a photo of the label and we’ll know the same day what’s available.
Get Your Tremron Kitchen Fixed Right
Whether it’s one hinge or a full Tremron kitchen remodel, the process is the same: a live arrival time, a written price before any work starts, and photo updates while we’re in your kitchen. You’ll know exactly who’s coming, when they get there, and what it costs. Call (626) 657-5396 to schedule your free estimate. We serve Pasadena and the surrounding neighborhoods, including Bungalow Heaven, Madison Heights, and San Rafael.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Pasadena at Sawyer Remodel Pasadena, serving Pasadena and nearby areas.
