Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Pasadena Owner’s Guide
If you have a Barrette roof product that’s failing in Pasadena, we can match the replacement part and install it, usually within the same week once we confirm the exact profile and dimensions. Typical installed replacement work runs $400 – $1,800 depending on whether it’s a localized repair or a larger section that needs redoing, and the estimate is free. Most Pasadena homeowners discover the failure after a winter rain, when a water stain shows on the ceiling or a piece of flashing comes loose in the Santa Ana winds. Barrette stopped manufacturing some of its older roofing lines years ago, which is exactly why matching the part correctly before you buy anything matters more than the price of the part itself.
One thing to know up front: Sawyer Remodel Pasadena is an independent contractor. We are not affiliated with Barrette, but we work with their profiles regularly enough to know which parts are still available, which have been discontinued, and which aftermarket equivalents actually hold up in Southern California sun.
Which Barrette Models This Applies To
Barrette’s roofing footprint in Pasadena is mostly tied to their metal tile and stone-coated steel profiles from the 2000s and early 2010s, along with a smaller number of composite shingle jobs. The compatibility issue almost always comes down to two things: the panel profile (the shape of the rib or tile contour) and the fastening pattern. If you have a Barrette stone-coated steel roof, the panel width is the first measurement to check, because Barrette’s tile-profile panels came in both 26-inch and narrower custom widths depending on the year they were manufactured.
Here’s the gotcha we see regularly in Pasadena: the profile looks identical from the ground, but the clip spacing is off by a half-inch, so the replacement panel won’t seat properly. We always measure the old panel, not just eyeball it. OEM Barrette parts are scarce now because several of their roofing lines were absorbed or discontinued. When OEM isn’t available, we use a quality aftermarket stone-coated panel that matches the gauge and profile, and we tell you before ordering whether the color match will be exact or close. Close is fine on the back slope. On the street-facing side, exact matters more.
Styles & brands we work with
Signs Your Barrette Roofing Is Failing
- Granule loss in the valleys or at the eaves. Stone-coated steel sheds its outer granules over time, and in Pasadena the UV exposure accelerates it. If you see bare metal showing through in patches, the panel’s protective layer is gone and rust follows within a season or two.
- Water staining on the ceiling after wind-driven rain. This usually isn’t the panel itself; it’s failed flashing around a penetration or a worn-out pipe boot. The good news is that’s a repair, not a re-roof.
- Loose or lifted panel edges near the rake. The Santa Ana winds in Pasadena catch the exposed edges first. If a panel lifts even slightly, the fastening has failed, and rain will get driven underneath.
- Rust spots at the cut edges or around screw heads. Stone-coated panels are cut on-site at the roof edges, and if the cut wasn’t treated, that’s where corrosion starts first. We see this most on Pasadena homes with original Barrette installs from the 2000s.
- Squeaking or clicking when the roof heats up. That’s thermal expansion working against loose fasteners. It’s not just noise; it means the panel is moving, and movement eventually wears out the gaskets under the screw heads, which is where leaks begin.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Pasadena, most Barrette-compatible roofing repair work falls between $400 and $1,800. A simple flashing replacement or pipe boot swap runs on the lower end, around $400 – $700. Replacing a damaged panel or a small section runs $800 – $1,400 depending on access and whether we need to match an older profile with an aftermarket panel. A larger repair that requires removing and resetting multiple panels goes up to $1,800, and a full roof replacement is priced separately at $8,000 – $20,000.
Every quote from Sawyer Remodel Pasadena is a written line-item price before any work starts. You see the cost of the part, the labor, and the disposal separately. There are no change orders unless you ask for something different. The work is covered by our 365-Day Done Right Promise: if the repair fails within a year, we come back and make it right. That includes a free second visit if the same issue returns.
DIY or Call Us?
From the ground, you can safely check for visible granule loss, rust streaks, or missing flashing, and you can take photos of the roof surface from a ladder placed on level ground. What you shouldn’t do is walk a stone-coated steel roof in Pasadena to inspect it yourself. Those panels are slippery when dry and worse when there’s morning dew or dust from the hills, and a fall from a two-story Pasadena roofline is a life-changing injury. If the roof pitch is steep, the risk is not worth the few hundred dollars a repair costs.
If you’ve already identified the failed part, or if you just know something is wrong and want eyes on it, call (626) 657-5396. We’ll come out, inspect what’s actually failing, and give you the written price before you commit to anything.
FAQs
Stone-coated steel panels are rated for 40 to 50 years, but in Pasadena the failure point is rarely the panel itself; it’s the flashing, fasteners, and pipe boots that wear out around year 15 to 20 and need replacement. The UV exposure here is relentless, and rubber gaskets under the screws dry out and crack faster than they would in a milder climate. If your roof is over 15 years old and you haven’t had the penetrations inspected, that’s the first thing to check. Call (626) 657-5396 and we’ll take a look for free.
A small puncture or a rust spot at a cut edge can sometimes be patched with a color-matched stone-coated patch, and that repair can last for years. Once the panel is creased, dented, or the fastening points have failed, replacement is the honest fix. We’ll tell you which one applies before we quote anything. If you’re unsure whether yours is repairable, call (626) 657-5396 and describe what you’re seeing; we’ll give you a straight answer.
Most single-panel replacements and flashing repairs are done in under a day, usually 3 to 5 hours from start to cleanup. If we need to order a specialty aftermarket panel to match a discontinued profile, the job extends to 5 to 7 business days from the time we confirm the measurements. You’ll know the timeline before you approve anything.
We stock the most common flashing profiles, fasteners, gaskets, and sealants on our trucks, so most Pasadena repair calls are handled in one visit. For full replacement panels, especially in an older Barrette profile, we source the exact match or a verified aftermarket equivalent before we schedule the install. We also work with parts from other brands we regularly install, including KraftMaid, Cambria, and Silestone, so if your home has mixed materials we can usually handle the whole scope without you chasing multiple contractors.
Luca Romano grew up in East Los Angeles and spent years working on older Pasadena craftsman homes, including plenty near Bungalow Heaven where the original rooflines and detailing demand a careful, patient approach. The work tells you everything. You just have to know how to listen to it.
If you have a Barrette roof part that’s failing, call (626) 657-5396 for a free estimate. We’ll match the part, write the price, and show you the before-and-after photos when we’re done.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Pasadena at Sawyer Remodel Pasadena, serving Pasadena and nearby areas.
