Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Pasadena Owner’s Guide
A full Boral kitchen remodel in Pasadena typically runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and how much of the existing kitchen we’re taking down to the studs. Most owners call us after living with a kitchen that stopped working years ago: drawers that stick, cabinet doors that won’t stay shut, a countertop seam that’s opened up, or a layout that fights every meal prep. We stock and install Boral-compatible cabinetry lines and can usually start a Pasadena kitchen gut-out within two to three weeks of the signed estimate. The work tells you everything. You just have to know how to listen to it.
Key Takeaways
- Installed cost: $14,000 – $45,000 for a full Boral kitchen remodel in Pasadena.
- Smaller scope: Cabinet installation alone runs $4,000 – $13,000; countertops $2,000 – $6,500.
- We’re independent: Sawyer Remodel Pasadena is not affiliated with Boral. We install and service Boral product lines.
- Price in writing: You approve a written line-item price before any demo starts. No surprise change orders at the end.
- Call (626) 657-5396 for a free estimate on your Pasadena kitchen.
Which Boral Models This Applies To
Boral cabinetry and trim products show up in a lot of Pasadena kitchens built or remodeled between the late 1990s and the mid-2010s. The brand’s ready-to-assemble and semi-custom cabinet lines were sold through regional kitchen and bath suppliers, which means model labels vary: you’ll see series names like Boral Expressions, Boral Heritage, and Boral Classic on the inside of a drawer box or on the back of a door panel. If the label is gone, measure the drawer box width and the hinge spacing. Boral cabinets from that era commonly used 35mm cup hinges on face-frame boxes, which matters if you’re replacing a single door or drawer front rather than the whole run. OEM Boral parts are getting harder to source, especially drawer glides and matching door profiles. In most Pasadena kitchens we recommend quality aftermarket drawer glides with the same 45mm side-mount spacing and full-extension travel, because the OEM glides were the first thing to wear out and the aftermarket replacements from Blum or Salice actually last longer than what Boral shipped.
Styles & brands we work with
Signs Your Boral Kitchen Remodeling Is Failing
- Drawer glides stick or drop at the back. The nylon rollers inside the original Boral side-mount glides crack after years of Pasadena’s dry summer heat, and the drawer starts dragging or tilting forward when you pull it past halfway.
- Hinge screws strip out of the face frame. This is the most common Boral-specific failure we see. The original particleboard face frames are soft, and repeated opening and closing eventually wallows out the screw holes so the door sags.
- Melamine edges peel on cabinet boxes. Once a door or drawer front edge lifts, moisture from cooking gets behind the laminate and it spreads. In older Pasadena homes without range hoods venting outside, this happens faster.
- Countertop seams open up. If your Boral cabinets were installed with a laminate or solid-surface top, seasonal movement in the cabinets transfers to the counter. A visible seam gap means the base cabinets have shifted.
- Doors won’t stay closed or won’t align. When hinges wear unevenly, two adjacent doors start rubbing or one sits an eighth of an inch higher than its neighbor. Adjusting hinges helps for a while, but at some point the hinge itself is finished.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Pasadena, here’s what we quote for Boral kitchen work, installed:
- Full kitchen remodel with Boral-compatible cabinets: $14,000 – $45,000
- Cabinet installation only: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
The range comes down to three things: how many linear feet of cabinetry, whether we’re doing a full gut-out or a cabinet swap, and what countertop material you pick. A small Pasadena galley kitchen with laminate tops lands near the bottom. A full Boral teardown with new island, quartz or solid-surface tops, and tile backsplash lands near the top. Every quote is a written line-item price: parts, labor, disposal, and permits if the job needs them. You see the number before any demo starts, and the invoice matches what you approved. The 365-Day Done Right Promise covers the work for a full year afterward.
DIY or Call Us?
Some Boral kitchen fixes are safe to check yourself: tightening a loose hinge screw, cleaning old grease out of drawer glides, or replacing a broken drawer pull. If the hinge screw has stripped the particleboard, don’t keep driving a bigger screw into it – you’re making the hole worse and the door will eventually rip out. Cabinet removal is also where DIY projects go sideways fast: a uppers cabinet loaded with dishes can weigh 80 pounds, and dropping one on a Pasadena tile floor or on yourself is not worth the money saved. If your Boral kitchen needs more than a hardware swap, call us at (626) 657-5396. Luca Romano and the crew will tell you honestly whether the cabinets are worth rebuilding or if it’s time to replace the run.
FAQs
Boral cabinets in Pasadena typically last 15 to 25 years depending on kitchen humidity, how hard the drawers and doors get used, and whether the original install was done right. The glue and particleboard in Boral boxes break down faster in homes without proper range hood ventilation, since cooking moisture is the enemy of the substrate. If your Boral cabinets are past year 20 and showing multiple failure signs at once, replacement usually makes more sense than piecemeal repair. Call (626) 657-5396 and we’ll give you an honest read on what’s left in them.
Yes, individual Boral cabinet failures like stripped hinge holes, worn drawer glides, and misaligned doors can often be repaired for a few hundred dollars, especially if the cabinet boxes are still square and dry. Repairs make sense when the boxes are solid and the problem is hardware or a single door. When multiple boxes show swelling, delamination, or shifted bases, you’re putting money into a system that’s already failing. We’ll tell you which situation you’re in before quoting anything.
A full Boral kitchen remodel in Pasadena typically takes 4 to 8 weeks from demo to final walkthrough, depending on cabinet lead time, countertop fabrication, and whether we’re moving plumbing or electrical. A cabinet-only swap with no structural changes can often be done in 1 to 2 weeks. You’ll get a schedule with written milestones before we start, and photo updates at each stage so you see the progress without driving home to check.
We stock common Boral-compatible replacement hardware on our trucks: Blum and Salice drawer glides, 35mm cup hinges, and adjustable face-frame brackets, so a single-door or single-drawer repair in Pasadena is usually a one-trip job. For full cabinet runs, we order Boral-compatible lines through our supplier partnerships alongside KraftMaid, Cambria, and Silestone products, giving you name-brand options with manufacturer backing. Call (626) 657-5396 and we’ll check what’s available for your specific Boral model.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Pasadena at Sawyer Remodel Pasadena, serving Pasadena and nearby areas.
