Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Pasadena Owner’s Guide
If you own a KraftMaid kitchen in Pasadena and you’re hunting for the right person to remodel or repair it, this page is for you. We match KraftMaid cabinetry to the correct hinges, drawer slides, door fronts, and hardware every week, and a full KraftMaid kitchen remodel in Pasadena typically runs $14,000 to $45,000 depending on scope, cabinet line, and whether countertops and backsplash are included. Most owners find us the same way: a drawer that won’t close, a hinge that snapped, a door that’s sagging, or a cabinet box that’s pulling away from the wall years after the original install. It almost never starts as a full remodel, but it often ends as one.
Which KraftMaid Models This Applies To
KraftMaid builds cabinetry across several lines, and the differences matter when you’re replacing parts. The Vantage and Venetian lines are the most common in Pasadena homes built or remodeled in the last fifteen years. The Benton and Durango lines show up often in newer builds. Each line uses its own door profile routing, and hinge plates are not interchangeable across every line, even when the door measures the same. A gotcha we see constantly: a Vantage hinge mounted on a Venetian door will leave a visible gap and chew up the cup hole over time. Always check the model sticker inside the cabinet box or on the back of the drawer face before buying anything.
KraftMaid is a Masco company, and Sawyer Remodel Pasadena is an independent contractor. We are not a KraftMaid dealer or affiliate. We source original KraftMaid replacement components and quality aftermarket equivalents when the OEM version is discontinued or backordered. In our experience, OEM KraftMaid hinges and drawer slides hold up better than most generic replacements because the cup depth and screw pattern are machined to match exactly.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Sagging door corners that scrape the frame. This usually means the hinge cup has ovaled out or the door itself is absorbing moisture. In Pasadena’s dry heat, solid wood doors can shrink and pull hinge screws loose faster than you’d expect.
- Drawers that stick mid-pull or slide unevenly. KraftMaid’s undermount slides wear at the ball bearing race. Once one bearing goes, the drawer develops a hitch you can feel every time you open it.
- Cabinet boxes pulling away from the wall. Older installs in Pasadena homes near Bungalow Heaven or Madison Heights often used drywall anchors instead of stud fasteners. That’s a structural problem, not a hardware problem.
- Soft-close stops working on one side but not the other. The damper piston inside the hinge has failed. KraftMaid soft-close hinges are not repairable internally; the hinge gets swapped.
- Water staining or swelling at the sink base cabinet. A slow leak under the sink wicks up into the cabinet box. Particleboard core swells permanently. The fix is a new cabinet box, not a sand-and-paint job.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full KraftMaid kitchen remodel in Pasadena typically lands between $14,000 and $45,000. A smaller kitchen with refaced or select-new cabinets runs closer to the lower end; a full gut-out with new KraftMaid cabinetry, Cambria or Silestone countertops, tile backsplash, and island work pushes toward the top. Here’s how the pieces break down:
- Cabinet installation: $4,000 to $13,000
- Countertop installation: $2,000 to $6,500
- Backsplash installation: $800 to $2,500
- Kitchen island installation: $3,000 to $10,000
- Full small kitchen remodel: $9,000 to $20,000
Every quote includes a written price before any work starts. That’s the number you approve, and that’s the number on the invoice. No change orders unless you ask for something different. Parts are line-itemed separately from labor, so you can see exactly what you’re paying for. The work carries our 365-Day Done Right Promise: if it’s not done right, we make it right. In writing, every time.
DIY or Call Us?
You can check a few things safely. Look inside the cabinet box for the KraftMaid model sticker. Measure the door width, height, and thickness. Test each drawer and see if the problem is one side or both. That information saves a service call. But replacing hinges, slides, or cabinet boxes is not a beginner’s job, especially when European-style cup hinges and undermount slides are involved. KraftMaid doors are heavy, the tolerances are tight, and a misaligned hinge set will strip the cup hole and ruin the door. That turns a $40 hinge job into a $300 door replacement. Call us at (626) 657-5396 and we’ll tell you honestly whether it’s worth fixing or replacing.
FAQs
KraftMaid cabinets in Pasadena’s dry climate typically last 20 to 30 years for the cabinet boxes, but hinges, drawer slides, and soft-close dampers usually need replacement at the 10 to 15 year mark. The wood holds up; the moving parts wear first. Call (626) 657-5396 for an exact assessment; estimates are free.
Yes, in most cases a single cabinet box, door, hinge, or slide can be repaired or swapped without touching the rest of the kitchen. The exception is water-damaged particleboard, which must be replaced because it loses structural integrity once it swells. Call (626) 657-5396 for a free estimate; we’ll tell you if repair makes sense.
Most KraftMaid kitchen remodels in Pasadena take 3 to 6 weeks from first cut to final cleanup, depending on whether you’re replacing the whole layout or refreshing specific sections. Demolition and cabinet install run about a week, countertop fabrication adds two to three weeks, and backsplash plus finish work lands in the final stretch. Call (626) 657-5396 for a timeline specific to your kitchen.
We stock the most common KraftMaid hinges, drawer slides, and soft-close dampers on the truck for Vantage and Venetian lines, and we order OEM replacements for other lines with a typical lead time of one to two weeks. We also stock compatible parts for Cambria, Silestone, and Kohler. Call (626) 657-5396 if you need a specific part; we’ll check inventory before you book.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Pasadena at Sawyer Remodel Pasadena, serving Pasadena and nearby areas.
